Exchanged my PB pro and BB case for the graphite and black leather. I always go black and thought I’d go outside of my comfort zone this year...that did not last very long.
liking the case and have until 8 Jan to decide if I want to keep it. Love the new long return date
I'm using the ESR glass screen protector (listed as .3 mm) with the Apple Silicone case on my 12 Pro. The screen protector does not touch the table when I lay it face down.Can anyone with a glass screen protector say how much lip there is on the Apple leather or silicone? Looking to see if I could lay it face down without the screen protector touching the table.
I had the armor cloud for my iPhone 12 Pro but ended up returning it. It's a good case (stiff so no give) and a tight fit which made it quite tough to remove the phone from the case. Also, the lip of the case was bigger than the UAG Monarch case so if it falls flat on its screen I'm sure the device will be just fine. And the volume/power button had a nice tactile feel.With the X I had a few speck presido clear cases. they were so stiff and hard to get on they worked well even when the phone falls and smashes screen down on a concrete floor - the screen protector was never broken
but with the 11 pro max i also bought a speck and it was a lot looser and a result when the phone falls to the floor face first the screen protector would get chipped since the phone would sort of bend out of the case for a short time since the case wasnt tight enough so after changing the screen protector 3 times i gave up on that and bought a pelican case and havent had the problem since
now the question is how are the speck gemshells or the speck presidio 2 armor cloud .. are they stiff enough like the specks for the iphone X and is the Otterbox symmetry clear case better than the clear specks or roughly the same..
I was thinking about this one as well, but the shiny back is likely quite scratch prone, unfortunatelyI had the armor cloud for my iPhone 12 Pro but ended up returning it. It's a good case (stiff so no give) and a tight fit which made it quite tough to remove the phone from the case. Also, the lip of the case was bigger than the UAG Monarch case so if it falls flat on its screen I'm sure the device will be just fine. And the volume/power button had a nice tactile feel.
My biggest complaint with the case is how slippery it is. If it had some grips it would've been my favorite case for the device but it always felt like it would slip from my hand when I held it. Sucks because the case has such a cool look.
Not a single scratch after 2-3 days of continuous use with the solidsuit on.after removing the case once, ive noticed super fine scratches on the sides. they are veryyyy fine but its ALL over the phone lol. i have never used the phone naked so im assuming it all came from the case. have you checked if the same thing happened to yours?
I tried the regular non-clear symmetry and the fit was good. Not as good and tight as the armor cloud. Honestly, if you don't care about the slickness of the case I highly recommend it. The slickness was my only complaint and the dealbreaker for me. I now use the Black Apple magsafe leather case which feels amazing but nowhere near as protective and my mous limitless 3.0 arrives tomorrow so fingers crossed that case meet my expectations.What about the otterbox symmetry clear -- i wonder if its nice and snug like the speck armor cloud2. Yes i know lots of these are slick but that part doesnt bother me. i just want something very snug so it doesnt slip out for half a second when the phone hits the floor face down
I agree with you that the bottom lip makes it harder to swipe up. Check out the Mujjo leather case. It has the bottom cutout. I have one for my 12 Pro Max and I'm liking it so far. The buttons are stiff at the beginning, but the hope is over time it'll soften up and be pretty responsive.I do not like Apple's new silicone case for my iPhone 12 Pro Max. I miss the bottom cutout that my last Apple leather case had. Everytime I try to swipe up the bottom of the case is in the way.
Yep, Apple finally changed the design this year for the Silicone and Leather cases as well to not leave the bottom open. I know many people will rejoice, but I am one of the few that really liked the open bottom design. Might have been tougher with the flat edges this year.I do not like Apple's new silicone case for my iPhone 12 Pro Max. I miss the bottom cutout that my last Apple leather case had. Everytime I try to swipe up the bottom of the case is in the way.
Yep, Apple finally changed the design this year for the Silicone and Leather cases as well to not leave the bottom open. I know many people will rejoice, but I am one of the few that really liked the open bottom design. Might have been tougher with the flat edges this year.
Yes!!! I’m glad your max is finally getting delivered.
Makes sense. I never quite understood why the grip matters. I don't grab my phones with an iron grip or anything and yet when I drop it has nothing to do with slipping its just clumsiness. Maybe its to do with the gripping style of a persons fingers. I dont even have huge hands.I tried the regular non-clear symmetry and the fit was good. Not as good and tight as the armor cloud. Honestly, if you don't care about the slickness of the case I highly recommend it. The slickness was my only complaint and the dealbreaker for me. I now use the Black Apple magsafe leather case which feels amazing but nowhere near as protective and my mous limitless 3.0 arrives tomorrow so fingers crossed that case meet my expectations.
I would say if they released a grip version of the armor cloud I will purchase it immediately as that should resolve my only issue with the case.
What’s the best super slim cases with good fitment ? Peel and totallee ? Anything else ? Pics ?
Would love to see some front shots of the peel clear case if poss please to try and see how thin the front lip is TIA 😊Here are a few pics of my new Peel cases.
This is the “soft” clear case.
I have more at different angles. If you want to see those, just let me know. This clear case is the most comfortable to use but buttons are stiffer than say the Torras clear case. The jet white is pretty much like holding the phone without a case but less slippery, not as comfortable to hold.
A couple of reasons. First, when the screen is off, it makes it more apparent which end of the phone is the top and which end is the bottom. I also like the way the naked phone feels when resting against my pinky...the phone itself never bugged me, but I've tried a number of enclosed bottom cases over the years, and almost every one rubbed my pinky in an uncomfortable way after some time. (I did have one phone a few years back where the trim around the charging port wasn't quite flush and felt rough, and that was annoying). Last, I've had issues with some cases interfering with the lightning cable. Now that I use wireless charging stands almost exclusively, that one is not really an issue anymore.I'm incredibly curious as to why you like the open bottom? My clear MagSafe has an open bottom but I can see tiny hairline scratches on the steel frame already and it's bumming me out.