Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
iPhone 15 Pro/Pro Max Screen Protector
- Thread starter VSMacOne
- Start date
- Sort by reaction score
Screenshot will show what the software does.
You need to capture a photo.
In other words, Spigen EZ Fit on 15 Pro.
I know that… the screenshot was simply used to convey that it is identical; the white lines are completely unobstructed.Screenshot will show what the software does.
You need to capture a photo.
In other words, Spigen EZ Fit on 15 Pro.
Isn’t it done by machine?. Mine also had the the bubble but top left after a few days. I had to get a warranty replacement.
Sounds like ESR isn’t actually making the protectors yet, they said they should be available in December.
Yea but because the 15 has a very minor bevel to the glass near the edges it won’t sit flat and bubbles form. The guy at the store told me it’s happening to a lot of screen protectors.
I’m the screen protector guru in my family and have tried a bunch of them including up to the Shellrus Sapphire. My favorite is still FloLab.
I was a solid NO on screen protectors up until one of my phones (I think it was the 6s) got a small but nasty scratch right in the middle of the screen that caused a visible rainbow effect, and I had to look at it for the next year or two.
Secondarily, screen protectors may have possibly saved my screen from being cracked on at least a few occasions... can't know for certain if the crack that occurred on the screen protector also would have happened to the screen itself if there was no screen protector though.
I’m a huge fan. I’d rather not risk scratching my screen because it’ll drive me crazy to look at it. Plus once the oleophobic coating wears off from the screen it becomes difficult to keep it clean. And I like using alcohol wipes to clean my devices.
ESR just got back to me and said that they're not close to fixing the issue... and just to offer met he full refund.
My top runners are Torras Diamond Shield and WSKEN Diamond HD. Torras seems to have better oleophobic coating and WSKEN better edge to edge coverage.
WSKEN here.
Sent the Torres back without even opening the box. WSKEN much better than spigen for sure. I’m done with searching screen protectors until 16 pro is out.
Sent the Torres back without even opening the box. WSKEN much better than spigen for sure. I’m done with searching screen protectors until 16 pro is out.
Okay so after their 4th attempt they have concluded that my screen must not be flat. He said I could trade in my phone, but that seems silly to me so I’m just going to go without a protector.
Is is standard EZ or it is EZ FC with black frame?Screenshot will show what the software does.
You need to capture a photo.
In other words, Spigen EZ Fit on 15 Pro.
Are you able to take an actual picture of the screen protector installed? I am debating between the WSKEN and FloLab 3D. I really don't like the speaker tab on the WSKEN.
Spigen EZ Fit WITHOUT black frame.
Screen protectors with black frames is a big NO for me.
I sent pictures of my screen protector cutting off part of the screen to Flolab. They replied that this was within manufacturing tolerances and did not offer a replacement. I will not be buying from them again. I'll use this one until the oleophobic coating wears off then replace it with Torras. I am extremely disappointed, for the price I expected much better service.
Hey All - iPhone 15 Pro (not max) user here, and I just installed my first set of the Torras Diamond Shield screen protectors. Unfortunately, I had haloing issues on both install attempts (although the installs were dust free and relatively easy).
The first attempt only had an issue across the top, and the second attempt presented the issue on almost the entire surrounding edge (a thin halo right along the inside of the black border). It is not case related, because the issue was present prior to putting the case (Otterbox Symmertry) on and the case is not touching the protector. No amount of squeegeeing helped; the thin line would just reappear (makes me think it is lift/fit vs trapped air).
The Torras screen protector itself doesn't appear to be curved, and I'm wondering if there are tolerance issues with their fit on the 15 Pro model. I've attached a picture of the issue for reference.
Thoughts on next steps? Try another batch under warranty or try a different make/model? Any insight or recommendations are greatly appreciated.
Thanks! - G1NO
The first attempt only had an issue across the top, and the second attempt presented the issue on almost the entire surrounding edge (a thin halo right along the inside of the black border). It is not case related, because the issue was present prior to putting the case (Otterbox Symmertry) on and the case is not touching the protector. No amount of squeegeeing helped; the thin line would just reappear (makes me think it is lift/fit vs trapped air).
The Torras screen protector itself doesn't appear to be curved, and I'm wondering if there are tolerance issues with their fit on the 15 Pro model. I've attached a picture of the issue for reference.
Thoughts on next steps? Try another batch under warranty or try a different make/model? Any insight or recommendations are greatly appreciated.
Thanks! - G1NO
Attachments
Contact their customer service for this situation maybe? This is the Torras Diamond Shield screen protector for my iPhone 15PM, edge to edge coverage is all good, other brands are expected to arrive next week.
I just bought a 15P for my girlfriend and bought some different screen protectors for her. I will compare them when they arrive.
