The button looks nice but sucks, I'll pass on this one also.In @TechnicallyTee ‘s live session video that Benks button was not good at all.
The button looks nice but sucks, I'll pass on this one also.In @TechnicallyTee ‘s live session video that Benks button was not good at all.
Added to the WikiPost.New case with a slit camera control button
Yea, that's what it is. Looks like another pass to me. Wouldn't that be something if all we needed was a thin slit button to solve the CC button dilemmaAdded to the WikiPost.
It appears the CC button is just a thin layer of poly with no capacitive material built in - does it look that way to you?
Another hard pass for meGrip with CC. Copper rods again.
Agreed. Apple, Spigen, and Otterbox still have a complete lock on it. I’m following this topic out of curiosity, but at this point I’m fully converted to open sides/no buttons, whether that’s Pitaka/Benks/Latercase, Süti, or Arc.I do not think PR or Caudabe CC button going to be any better.
Yeah. Ive been using my scratched symmetry all day and i must say the cc button is flawless. No lag at all.Agreed. Apple, Spigen, and Otterbox still have a complete lock on it. I’m following this topic out of curiosity, but at this point I’m fully converted to open sides/no buttons, whether that’s Pitaka/Benks/Latercase, Süti, or Arc.
I’ve said it before, but if the IP17 goes full capacitive as rumored, these smaller case companies are going to be in a world of hurt.
No it was the AuroraPro with cutout. The one with button isn’t released yet. I’m going to pass on it and the Prestige as well. I’m fully satisfied with ArmorAir Aurora. Only one that catches my interest is the Prestige in ArmorAir form but I wouldn’t entertain it unless it came out on Amazon. I prefer not to buy direct from Benks.You have new updated Aurora ArmorPro with button?
Just checking as my post above was commenting on TechnicalTee's YouTube video Sal09 mentioned where he shows the updated button Aurora ArmorPro not working well at all and it looked to me like it wasn't put back in correctly after popping it out.
Whoa! I didn’t see that coming! Merry Christmas! 🎁🎄😊Merry Christmas Peeps
As far as I know, the Spigen Tough Armor T AI is the only case in the mid to heavy duty category that has a good camera control button. If you decide to go with the Spigen, be sure to purchase it either on eBay or Amazon as it’s much more expensive on the Spigen website.I’ve been having a hard time finding any IPhone 16 cases in Canada that are more protective than just a simple plastic but it has a camera control button. I got a Supcase unicorn beetle grip, but it’s just out of the box already had some scratches I can’t imagine how it’ll look like in a few months… plus it looks and feels so flimsy and I doubt it really protects your phone if you drop it… I love Otterbox defender type cases, but this new “cut out” is ridiculous. I would appreciate any recommendations on iPhone 16 (not Pro/Max) cases.
I wish! 🙄 But Tough Armor T AI with a camera control button is only available for iPhone 16 Pro or Pro Max, not for a basic iPhone 16!As far as I know, the Spigen Tough Armor T AI is the only case in the mid to heavy duty category that has a good camera control button. If you decide to go with the Spigen, be sure to purchase it either on eBay or Amazon as it’s much more expensive on the Spigen website.
![]()
iPhone 16 Series - Tough Armor T AI (MagFit + Camera Control)
Defend your iPhone 16 Pro / Pro Max. Shop our best selling magsafe compatible Tough Armor T AI (MagFit) Case. Utilizing AI, we've targeted the highest impact / drop points to redesign how your device is protected. We've got you covered.www.spigen.com
Ah, that’s right. ☹️I wish! 🙄 But Tough Armor T AI with a camera control button is only available for iPhone 16 Pro or Pro Max, not for a basic iPhone 16!
I don’t know of any other cases with the CC button cover for the regular iPhone 16’s. I think right now they’re mostly only available for the Pro’s. It does seem strange though that the ones for the Pro’s are not available for the regular iPhone 16’s.I’ve been having a hard time finding any IPhone 16 cases in Canada that are more protective than just a simple plastic but it has a camera control button. I got a Supcase unicorn beetle grip, but it’s just out of the box already had some scratches I can’t imagine how it’ll look like in a few months… plus it looks and feels so flimsy and I doubt it really protects your phone if you drop it… I love Otterbox defender type cases, but this new “cut out” is ridiculous. I would appreciate any recommendations on iPhone 16 (not Pro/Max) cases.
Not sure if they’re also in Canada but a few from the front page list that are also available for regular 16s are:I’ve been having a hard time finding any IPhone 16 cases in Canada that are more protective than just a simple plastic but it has a camera control button. I got a Supcase unicorn beetle grip, but it’s just out of the box already had some scratches I can’t imagine how it’ll look like in a few months… plus it looks and feels so flimsy and I doubt it really protects your phone if you drop it… I love Otterbox defender type cases, but this new “cut out” is ridiculous. I would appreciate any recommendations on iPhone 16 (not Pro/Max) cases.
It’s a mystery to me too. If you made some changes to your existing line of cases, why not to have them available for any iPhone 16s? 🤷🏻♀️I don’t know of any other cases with the CC button cover for the regular iPhone 16’s. I think right now they’re mostly only available for the Pro’s. It does seem strange though that the ones for the Pro’s are not available for the regular iPhone 16’s.
Unfortunately none of those brands are sold in Canada with the exception of Apple’s cases definitely, plus TAC and Meifigno, both are plastic cases again, and it’s something I’m trying to avoid by all means. Lol 😂. dBrand looks tempting, but again dBrand is using the same capture button technology with copper conductors as a Supcase, plus with the shipping fee, most likely duty and taxes, and USD to CAD exchange rate, we’re talking about $120+ CAD case… I’m not sure if it’s even worth it…Not sure if they’re also in Canada but a few from the front page list that are also available for regular 16s are:
TAC
Meifigno
dBrand grip
and of course Apple’s cases
I had the same issue even in the states. Then the issue was amplified by wanting one that showed off my white iPhone color too. If that wasn’t a factor I probably would’ve kept the Meifigno tinted black case but I went with apple’s clear case instead. Not perfect but gets the job done and checked the most boxes for me personally.