Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.
I tried installing twice now on MBP5,1 with 14.1 installed, using a BT 4.0 dongle. Both tries it seems to install fine, but upon reboot, it crashes with a kernal panic. I tried reapplying the post install patches, but that didn't help. Both times had to reinstall 14.1 over top of the existing install, reapply the post-install patches to be able to boot again. Tried booting without the dongle in and it still crashed for me. Not sure if I did something wrong, or if it just won't work with this setup.

Take a look here, maybe you'll find a solution. Could be an issue between the CAT patched bluetooth and the applied bluetooth patch from the Mojave patcher.
Maybe the.burn can help you out, I don't use CAT so it's just guessing on my side but trying to help..
https://github.com/dokterdok/Continuity-Activation-Tool/issues/438
 
Take a look here, maybe you'll find a solution. Could be an issue between the CAT patched bluetooth and the applied bluetooth patch from the Mojave patcher.
Maybe the.burn can help you out, I don't use CAT so it's just guessing on my side but trying to help..
https://github.com/dokterdok/Continuity-Activation-Tool/issues/438

It seems even with the swapped out card, CAT doesnt fully work for some including me. Airdrop works fine but handoff doesnt work at all (using both that tool and the lilu kext/Continuity kext). The same config works fine in High sierra
 
  • Like
Reactions: TimothyR734
Upon using of 10.14.1, I noticed this graphic anomaly:
Finder tab gets scattered lines on its name when opening other tabs or when Finder window is out of focus like if I opened other program window).
Is it something related to MojaveOS itself and the fact that it is still getting updated. or due to my GPU(intel3000HD) which is not metal supported?

I noticed it also in safari it looks like light grey dashes on the tab.
PS: I use light mode with transparency reduced.
 

Attachments

  • Screen Shot 2018-11-22 at 02.44.02.png
    Screen Shot 2018-11-22 at 02.44.02.png
    19 KB · Views: 191
Last edited:
  • Like
Reactions: TimothyR734
Well I had to reinstall the OS after I upgraded the GPU because I figured it was easier than trying to remove the Legacy Video Patch. Anyways, after some grinding of the heatsink, I have upgraded my late 2009 iMac with a SSD and a Nvidia GTX 770m. Thanks @dosdude1 and everyone else here that has worked to keep our machines relevant. I'm off to bed, Happy Thanksgiving everyone!
 

Attachments

  • Screen Shot 2018-11-22 at 5.24.27 AM.png
    Screen Shot 2018-11-22 at 5.24.27 AM.png
    4.1 MB · Views: 292
hi, has anyone installed It on a MacBook Pro mid 2010? is there anything annoying? I use my macbook for work, so I didn't a lot of tests on it. If anyone has installed it, please, tell me if it's something not working, so I can figure out what to do. Anyway, thanks to @dosdude1 and everyone else, great job!
 
  • Like
Reactions: TimothyR734
hi, has anyone installed It on a MacBook Pro mid 2010? is there anything annoying? I use my macbook for work, so I didn't a lot of tests on it. If anyone has installed it, please, tell me if it's something not working, so I can figure out what to do. Anyway, thanks to @dosdude1 and everyone else, great job!

It works well, check the front page. I have a MacBook7,1 which is a nearly identical machine and it works perfectly except for the mentioned graphical glitches, but those can be mostly fixed by @pkouame and @testheit's patch.
 
Hy,
i got the ffollowing errorr when i want to make a USB stick for macos mojave
with the dosdes patcher.
I want to dowwnload
the monjae automatickly with patcher tool download mojave:
The application you have selected is not a valid copy of macOS Mojave.
 
  • Like
Reactions: TimothyR734
Help!
I have tried updating to Mojave with update patcher.
All seemed to have gone well but reboot gives ' no entry sign'
I cannot reach my basic system function anymore now using a usb keyboard!
So no pram reset or reinstall is possible..
Please help!
Tia
 
  • Like
Reactions: TimothyR734
I've installed Mojave on a mid-2009 17-inch MacBook Pro. Everything went smoothly. Over the past two weeks or so, though, I've been experiencing crashes when I reopen the laptop. The screen appears just as when I closed the lid, but after ten seconds or so it goes black and only power cycling gets it running again. It then works until the next time the lid is closed.

I've tried this both plugged in and on battery power and the only consistent way of causing the problem is closing and reopening. Has anyone else run into this problem? Could it be hardware related rather than due to using dosdude1's awesome software to commit unnatural acts on this machine?
 
hi, has anyone installed It on a MacBook Pro mid 2010? is there anything annoying? I use my macbook for work, so I didn't a lot of tests on it. If anyone has installed it, please, tell me if it's something not working, so I can figure out what to do. Anyway, thanks to @dosdude1 and everyone else, great job!
Hi, everything working in MacBook Pro 6,2 (15 inches).
 
Hi, everything working in MacBook Pro 6,2 (15 inches).
Can also confirm: 6,2 is doing well since several weeks :)
Hoping that tomorrow my RAM (4GB -> 8GB) will arrive. Since I decided now to use this machine for a bit longer than planned^^ Thanks @dosdude1 for saving my money :D

@flygbuss
I assume for me also only AirDrop is working, since in Mojave I never saw an app icon shared from my iOS devices until now.
However, AirDrop is the only Feature from these that I really need^^
 
Can also confirm: 6,2 is doing well since several weeks :)
Hoping that tomorrow my RAM (4GB -> 8GB) will arrive. Since I decided now to use this machine for a bit longer than planned^^ Thanks @dosdude1 for saving my money :D

@flygbuss
I assume for me also only AirDrop is working, since in Mojave I never saw an app icon shared from my iOS devices until now.
However, AirDrop is the only Feature from these that I really need^^

Have you turned on Bluetooth and WiFi on both devices? Turn it on (or off and back on if it was turned on already), reboot your Mac and your iOS device and see if it works after the reboot. Also handoff needs to be activated in macOS and iOS.
 
  • Like
Reactions: TimothyR734
It works well, check the front page. I have a MacBook7,1 which is a nearly identical machine and it works perfectly except for the mentioned graphical glitches, but those can be mostly fixed by @pkouame and @testheit's patch.

Am I missing something?

Are there any new patches out of pkouame?

Where do I find the information regarding the @testheit fix?

Thank you!
 
Help!
I have tried updating to Mojave with update patcher.
All seemed to have gone well but reboot gives ' no entry sign'
I cannot reach my basic system function anymore now using a usb keyboard!
So no pram reset or reinstall is possible..
Please help!
Tia
Once you have installed the OS you need to boot back to your USB installer and apply the Post Install patches for your particular Mac and then reboot to the Mojave installation, is this what you did?
 
Upon using of 10.14.1, I noticed this graphic anomaly:
Finder tab gets scattered lines on its name when opening other tabs or when Finder window is out of focus like if I opened other program window).
Is it something related to MojaveOS itself and the fact that it is still getting updated. or due to my GPU(intel3000HD) which is not metal supported?

I noticed it also in safari it looks like light grey dashes on the tab.
PS: I use light mode with transparency reduced.


I don't notice it at all when I use: Hybrid Mode Patchers (HIToolbox & CoreUI)
 
Last edited:
  • Like
Reactions: TimothyR734
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.