Got the 4th gen link. Just opened it, put it on and already have a problem :/
Put it on the first time, everything was fine. I just needed to take it back off to remove links. Took out about 6-7 links in all. Taking it off for the 2nd time (had to put back in 1 link), was a little more work. When I was putting it back on, one of the black bumpers
(there is one on either side of the button that clicks into the watch) seemed like it was a little higher, because I was sliding both sides of the band in, and on the one side this bumper was on, the watch seemed to be bumping into the bumper instead of sliding over the bumper, like usual.
It appears it came off. I put it on the white box and took a picture. However, I slid the band right in afterwards and it seemed everything was fine. Things clicked with no issue. Not sure if it's really going to be a problem. Thinking I should just contact the seller about it to be safe
As for the other problems people have mentioned with the 4th gen, I don't seem to have them. Some have mentioned the clasp not closing easily, but it's closing very easily on mine. No more force than a little press.
Some have also shown a video where the band could be pulled apart at the detachable links. Don't know what possessed the guy to try that. Anyways, I tried it on my band, and it wasn't happening.
There is one little dent on one of the links. 5th picture, 8th link down, on the right side. Doesn't even really look like one unless you look very closely.
There are small gaps. The most noticeable gap is between the first link that connects to the end, which connects to the watch.
Looks like they sent it in a white box as to not excite the feds
Gaps