Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.
Next up is the Pitaka Mag Ez 5 “break the line” edition.

This case is so nice looking I almost don’t want to use it and dirty it lol.

Much easier to remove than the mag ez 4, lighter, and feels like they got rid of any sharp areas. This case I will probably save to use this summer.
 

Attachments

  • IMG_1089.jpeg
    IMG_1089.jpeg
    394.5 KB · Views: 85
  • IMG_1088.jpeg
    IMG_1088.jpeg
    620.4 KB · Views: 81
  • IMG_1090.jpeg
    IMG_1090.jpeg
    392.7 KB · Views: 79
  • IMG_1091.jpeg
    IMG_1091.jpeg
    401.1 KB · Views: 78
Have some more goodies to share since we last spoke!

I guess I will break them up into different posts, only way I know how to keep it looking easy to read.

Recently received the Andar Aspen in black. Ordered it because I love the Aspen I have in Camel Tan, so naturally I needed the black to go with the black titanium iPhone. Not much to say that already hasn’t been said here. Great case, great buttons, not much to not like here.

I had another picture of the case off of the phone but it’s saying “picture too big”… sorry folks.
When you select pictures there’s a little “options” in the bottom left corner of your library. You can select it and change size to large or what not to get it to upload
 
  • Like
Reactions: Joe123Joe
Hopefully they come back in stock soon, and hopefully I can choose between the frosted and aramid soon lol. The one thing keeping me from leaning towards the frosted is the fact that I swap cases quite often, and these posts about the frost essentially peeling from the case, makes me hesitant.
The finish doesn’t actually peel, it more just rubs off from the corners of the phone pushing against it when installed. If you’re careful you can probably avoid it. Thatappleguytoday has his looking pristine and he uses it a lot.
 
  • Like
Reactions: Djones96
Last one I have to share is one I never see spoken about here. The Torras Slim Fit with MagSafe.

Last years edition of this case I couldn’t use because it was a smudge machine… but this year they corrected that and I haven’t had a single oil smudge on it. Case feels nice, a touch slippery if your hands are really dry, but the buttons are MUCH IMPROVED, and I love the way it looks. Only strange thing is when looking at it from the front, it has these odd flare outs in the corners. I’m assuming it’s for a tiny bit of drop protection but I could have lived without those as anyone buying this isnt buying for drop protection lol. I would def recommend for anyone looking for something ultra light and slim.
 

Attachments

  • IMG_1094.jpeg
    IMG_1094.jpeg
    434.3 KB · Views: 97
  • IMG_1093.jpeg
    IMG_1093.jpeg
    628.4 KB · Views: 96
  • IMG_1092.jpeg
    IMG_1092.jpeg
    617 KB · Views: 98
  • IMG_1095.jpeg
    IMG_1095.jpeg
    679.1 KB · Views: 96
Last one I have to share is one I never see spoken about here. The Torras Slim Fit with MagSafe.

Last years edition of this case I couldn’t use because it was a smudge machine… but this year they corrected that and I haven’t had a single oil smudge on it. Case feels nice, a touch slippery if your hands are really dry, but the buttons are MUCH IMPROVED, and I love the way it looks. Only strange thing is when looking at it from the front, it has these odd flare outs in the corners. I’m assuming it’s for a tiny bit of drop protection but I could have lived without those as anyone buying this isnt buying for drop protection lol. I would def recommend for anyone looking for something ultra light and slim.
Awesome case haul. They all look great and that Torras matches your phone perfectly 👌
Delivery 2 is here!

Ryan londen case

Rebel crystal clear

Rebel crystal

Titanium kit

Bullstrap flamingo and slate wallets
What a day for case deliveries! Eager to see your titanium kitted Phone Rebel.
 
Im in So. Utah too, St. George.

They certainly run out of stock frequently, it probably doesn’t help they were giving them free with a case purchase. Still…
Hey, St. George here too, small world, huh?;)

The matte black ones? Oof, wish I would've jumped on that deal, but hopefully they'll come back in stock soon.
The finish doesn’t actually peel, it more just rubs off from the corners of the phone pushing against it when installed. If you’re careful you can probably avoid it. Thatappleguytoday has his looking pristine and he uses it a lot.
Good to know, maybe I'll just need to get the case and be careful with it.
 
  • Like
Reactions: Zedicus16
Nice, can you give me some installation tips please?

Do you put the bottom in first and then snap the top in or install from the sides?

I just carefully install the left side first, then slowly snap the top right in and the bottom right last.

Removing the case I pull it off from the top. Camera ring side first.

Zero frosty issues
 
Aight. Excuse the crappy iPad Pro camera pictures lol feel free to request some. Out of all them I think I’m gonna send back the fully clear crystal. Just isn’t my cup of tea. Really like the white MagSafe ring tho.
 

Attachments

  • IMG_2907.jpeg
    IMG_2907.jpeg
    339.5 KB · Views: 89
  • IMG_2908.jpeg
    IMG_2908.jpeg
    367 KB · Views: 96
  • IMG_0316.jpeg
    IMG_0316.jpeg
    417.4 KB · Views: 97
  • IMG_0326.jpeg
    IMG_0326.jpeg
    285.4 KB · Views: 94
  • IMG_2906.jpeg
    IMG_2906.jpeg
    303.4 KB · Views: 94
  • IMG_2905.jpeg
    IMG_2905.jpeg
    272.6 KB · Views: 93
  • IMG_2919.jpeg
    IMG_2919.jpeg
    318.7 KB · Views: 94
  • IMG_2918.jpeg
    IMG_2918.jpeg
    315 KB · Views: 85
  • IMG_2910.jpeg
    IMG_2910.jpeg
    326.6 KB · Views: 83
  • IMG_2917.jpeg
    IMG_2917.jpeg
    339.3 KB · Views: 78
  • IMG_2915.jpeg
    IMG_2915.jpeg
    321.1 KB · Views: 74
  • IMG_2912.jpeg
    IMG_2912.jpeg
    283 KB · Views: 72
  • IMG_2911.jpeg
    IMG_2911.jpeg
    315.3 KB · Views: 77
  • IMG_2916.jpeg
    IMG_2916.jpeg
    312.9 KB · Views: 71
  • IMG_2913.jpeg
    IMG_2913.jpeg
    293.7 KB · Views: 73
  • IMG_2914.jpeg
    IMG_2914.jpeg
    312.4 KB · Views: 71
  • IMG_2925.jpeg
    IMG_2925.jpeg
    312.5 KB · Views: 83
  • IMG_2928.jpeg
    IMG_2928.jpeg
    318.1 KB · Views: 69
  • IMG_2927.jpeg
    IMG_2927.jpeg
    300.5 KB · Views: 75
  • IMG_2929.jpeg
    IMG_2929.jpeg
    335.5 KB · Views: 76
  • IMG_2923.jpeg
    IMG_2923.jpeg
    328.7 KB · Views: 73
  • IMG_2924.jpeg
    IMG_2924.jpeg
    350.6 KB · Views: 61
  • IMG_2922.jpeg
    IMG_2922.jpeg
    310.6 KB · Views: 63
Aight. Excuse the crappy iPad Pro camera pictures lol feel free to request some. Out of all them I think I’m gonna send back the fully clear crystal. Just isn’t my cup of tea. Really like the white MagSafe ring tho.
The aramid looks nice with the silver and the Apple logo you lasered. Could you pretty please share a pic of silver next to Nat ti? & tell which is which :)
 
Aight. Excuse the crappy iPad Pro camera pictures lol feel free to request some. Out of all them I think I’m gonna send back the fully clear crystal. Just isn’t my cup of tea. Really like the white MagSafe ring tho.
These pics are amazing, thanks for showing all the different colour combinations. Is your phone white or natural titanium?! I'm so bad with distinguishing colours on a screen haha.

I'm waiting until PR do the lanyards, then I'll I place my order (as it'll remove the Rebel branding lol) and save myself money on shipping. Thinking of going aramid Flex, lanyard button, and either matte silver/natural titanium for the camera ring.

Anyone have a picture showing the difference between Silver/Natural Ti? Which one would go better with the White Ti 15 Pro?
 
Aight. Excuse the crappy iPad Pro camera pictures lol feel free to request some. Out of all them I think I’m gonna send back the fully clear crystal. Just isn’t my cup of tea. Really like the white MagSafe ring tho.
SWEET ! Any protective lining on the inside of the new buttons?
 
These pics are amazing, thanks for showing all the different colour combinations. Is your phone white or natural titanium?! I'm so bad with distinguishing colours on a screen haha.

I'm waiting until PR do the lanyards, then I'll I place my order (as it'll remove the Rebel branding lol) and save myself money on shipping. Thinking of going aramid Flex, lanyard button, and either matte silver/natural titanium for the camera ring.

Anyone have a picture showing the difference between Silver/Natural Ti? Which one would go better with the White Ti 15 Pro?
My Phone is white. I always go white. But for the first time ever I was kinda regretting not getting natural Ti
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.