iPhone 15 Pro/Pro Max Screen Protector

[mathewdean]

I have just applied the Torras protector. Went on brilliantly, it covers further towards the bezel and the black rim doesnt cover any part of the screen. I dont think it feels sharp on the edge (the spigen one did as you swiped left to go back), and especially not with a case. It also fits against my wife's Cyrill case which is more chunky. No haze or rainbow around the edge. Its more expensive but you do get 2 in there. Definitely the one to go for!

 

[kvlq]

ONETIME PRO NanoArmour Screen Protector for iPhone with ClearVue Anti-Reflective Technology: Clear, Anti-Blue, Edge-to-Edge, Antimicrobial, No Yellow Tint

Upgrade your screen protection with FLOLAB ONETIME PRO screen protectors, featuring anti-reflective technology for museum-quality clarity. Our protectors are also treated with anti-blue light and anti-microbial properties for safe and healthy use. Our innovative installation tray ensures a...

flolab.io

See the link above. They are not cheap but oh so good. Really edge to edge with the black outline. I know some don’t like the black outline but I do. I think it helps the protector blend right in and look invisible. I’ve never had an issue with the edges lifting up.

some close-up pics with it installed? thanks

 

[TypeMRT]

I like this brand since it includes the camera protector as well and cheaper

https://www.amazon.com/dp/B0CBHRTQLG?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_5RDRV6Z9DK9J708A1N4S

I tried this one. I’m not a fan of how much of a gap there is around the border when using with a thin case – very noticeable when swiping up from the bottom. I’m going to buy the Torres to see if it’s any better.

 

[kvlq]

Until I get my new screen protectors for iPhone 15 Pro, I tried some Spigen ezFIT left from my old iPhone 14Pro.
THEY DO NOT FIT! I think the edges of the 15 are slightly curved and that's why it's not glued on the edges, it looks horrible.

 

[jetjaguar]

First time using the belkin one from apple .. expensive but no complaints.

 

[Cruncher]

I don`t like the Belkin ones as they are not going to the EDGE fully. I am using a Benks one until my Hoda Sapphire arrives. Costs more than a normal but I used mine on the 14 PM for a Year and had no complaints. I like the cool Touch of the sapphire glass and it has less smudges and fingerprint. I already hate the Benks one for collecting dust and smudge.

 

[alstrike]

Until I get my new screen protectors for iPhone 15 Pro, I tried some Spigen ezFIT left from my old iPhone 14Pro.
THEY DO NOT FIT! I think the edges of the 15 are slightly curved and that's why it's not glued on the edges, it looks horrible.

No disrespect but why did you expect that a product designed for a different phone would work on this one…

 

[kvlq]

No disrespect but why did you expect that a product designed for a different phone would work on this one…

because I ordered late the ones for 15 and did not arrived yet. Until these comes I tried what I had (the ones left from 14). And some also mentioned here that they are the same (WRONG).

Hope it makes sense now.

 

[tzxsean]

I don`t like the Belkin ones as they are not going to the EDGE fully. I am using a Benks one until my Hoda Sapphire arrives. Costs more than a normal but I used mine on the 14 PM for a Year and had no complaints. I like the cool Touch of the sapphire glass and it has less smudges and fingerprint. I already hate the Benks one for collecting dust and smudge.

which one of Benks you're using?

 

[noobinator]

Installed my ESR (cheaper one) last night and it went on perfectly first try. Can't even tell it's on the screen. Major major major go on the ESR.

 

[jonchilduk]

Installed my ESR (cheaper one) last night and it went on perfectly first try. Can't even tell it's on the screen. Major major major go on the ESR.

Are you experiencing the same issue as others where the black border is creeping into the display area? Cheers

 

[UnjustifiedBot]

I don`t like the Belkin ones as they are not going to the EDGE fully. I am using a Benks one until my Hoda Sapphire arrives. Costs more than a normal but I used mine on the 14 PM for a Year and had no complaints. I like the cool Touch of the sapphire glass and it has less smudges and fingerprint. I already hate the Benks one for collecting dust and smudge.

I used the Benks for a year on my 14pm and never had any issues. Anything more expensive seems like a waste of money to me. The one I have on my 15pm fits perfectly.

 

[UnjustifiedBot]

which one of Benks you're using?

I use these. BENKS [2 Pack] https://www.amazon.com/dp/B0CDV58G4N?ref_=cm_sw_r_apin_dp_V23BXFTASDMKF8XKYZCV

 

[noobinator]

Are you experiencing the same issue as others where the black border is creeping into the display area? Cheers

I had no clue this was an issue. I don't see anything like that.

 

[jonchilduk]

I had no clue this was an issue. I don't see anything like that.

Ace! 15 pro or pro max? Cheers

 

[noobinator]

Ace! 15 pro or pro max? Cheers

Pro max. I dunno if / how I’d be able to tell if this even happening. I certainly don’t notice anything.

 

[Cerneka]

This is not an issue with the Torras protector though?

Im not sure. I haven’t tried the torras yet.

 

[Cerneka]

ONETIME PRO NanoArmour Screen Protector for iPhone with ClearVue Anti-Reflective Technology: Clear, Anti-Blue, Edge-to-Edge, Antimicrobial, No Yellow Tint

Upgrade your screen protection with FLOLAB ONETIME PRO screen protectors, featuring anti-reflective technology for museum-quality clarity. Our protectors are also treated with anti-blue light and anti-microbial properties for safe and healthy use. Our innovative installation tray ensures a...

flolab.io

See the link above. They are not cheap but oh so good. Really edge to edge with the black outline. I know some don’t like the black outline but I do. I think it helps the protector blend right in and look invisible. I’ve never had an issue with the edges lifting up.

Can you possibly take some photos for us?

 

[drew0020]

I had no clue this was an issue. I don't see anything like that.

Don’t look for it if you don’t notice it. Someone pointed it out to me and now I can’t unsee it. I’m using the ESR Armorite for the iPhone 15 Pro.

Waiting on another screen protector because don’t like how a portion of the screen is hidden.

 

[Cerneka]

Pro max. I dunno if / how I’d be able to tell if this even happening. I certainly don’t notice anything.

You can tell by looking at the keyboard or on certain apps like Instagram. The rounded corners of an Instagram story are slightly cut off by the black bars. Minimal but annoying nonetheless.

 

[Robdmb]

If you want guaranteed installation is Belkin at Apple the way to go? I saw someone say it doesnt go to edge - is it close enough with a case on or still noticeable? Debating going to Apple to get the Belkin or the Torras.

 

[tzxsean]

seems like it's kind of a disaster for the screen protectors ...

i guess I should not order online and just go to mobile shop and ask for options

 

[Cerneka]

I use these. BENKS [2 Pack] https://www.amazon.com/dp/B0CDV58G4N?ref_=cm_sw_r_apin_dp_V23BXFTASDMKF8XKYZCV

How are you finding the Benks this year?

 

[Cerneka]

I don`t like the Belkin ones as they are not going to the EDGE fully. I am using a Benks one until my Hoda Sapphire arrives. Costs more than a normal but I used mine on the 14 PM for a Year and had no complaints. I like the cool Touch of the sapphire glass and it has less smudges and fingerprint. I already hate the Benks one for collecting dust and smudge.

How are you liking the Benks?

 

[Cerneka]

ONETIME PRO NanoArmour Screen Protector for iPhone with ClearVue Anti-Reflective Technology: Clear, Anti-Blue, Edge-to-Edge, Antimicrobial, No Yellow Tint

Upgrade your screen protection with FLOLAB ONETIME PRO screen protectors, featuring anti-reflective technology for museum-quality clarity. Our protectors are also treated with anti-blue light and anti-microbial properties for safe and healthy use. Our innovative installation tray ensures a...

flolab.io

See the link above. They are not cheap but oh so good. Really edge to edge with the black outline. I know some don’t like the black outline but I do. I think it helps the protector blend right in and look invisible. I’ve never had an issue with the edges lifting up.

I’ve seen some posts that say otherwise but maybe they had a different model. Yours goes edge to edge?

From the iphone community on Reddit: AVOID FloLab screen protectors

Explore this post and more from the iphone community

reddit.com