Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Yep! Confirming that it doesn’t cover anything. Like the P and Q buttons on the keyboard have the same amount of space on the sides of them and aren’t cut off at all. I don’t see any screen missing on my end!
Excellent. Nice colour combo with the case btw. Bought the same myself.
 
  • Like
Reactions: Prospekt
contrary to what others said, it seems that it has a slightly rounded edges, is it the case?
 
contrary to what others said, it seems that it has a slightly rounded edges, is it the case?
Tbh it’s hard for me to tell either way. The edges feel better than the ESR armorite I used on my 14 Pro and they feel better than the spigen align master I used yesterday on this 15 pro
 
  • Like
Reactions: Synomenon and kvlq
Just put the UltraGlass screen protectors on (they look to be the same as the Torras). First went on flawlessly. My wife is happy with the install. The second protector has to be manually put onto the installer (once the first screen protector has been installed, the second one must be put onto the installer). I think because of this, my install was slightly to the left which resulted on the right side BARELY overlapping the screen (has to be less than 1mm). But me being me... I now only see this and it's bothering me hahaha.
 
Just put the UltraGlass screen protectors on (they look to be the same as the Torras). First went on flawlessly. My wife is happy with the install. The second protector has to be manually put onto the installer (once the first screen protector has been installed, the second one must be put onto the installer). I think because of this, my install was slightly to the left which resulted on the right side BARELY overlapping the screen (has to be less than 1mm). But me being me... I now only see this and it's bothering me hahaha.
UltraGlass being the one from Belkin at 39.99$?
 
Just put the UltraGlass screen protectors on (they look to be the same as the Torras). First went on flawlessly. My wife is happy with the install. The second protector has to be manually put onto the installer (once the first screen protector has been installed, the second one must be put onto the installer). I think because of this, my install was slightly to the left which resulted on the right side BARELY overlapping the screen (has to be less than 1mm). But me being me... I now only see this and it's bothering me hahaha.
Did you also have the Torras version on another iPhone?
 
Installed the Torras an hour ago. Easily the easiest and most dust-free install I've ever done of a screen protector. It doesn't go all the way to the edge. It's compatible with the three cases I have so far.
Is your Torras one with the black edges for the 15 Pro Max? Does the thin black edge allow 100% of the iPhone display through? Thanks.
 
Torres went on perfect for me as well. I usually get the Belkin UltraGlass or AT&T Tempered Glass. Check out post #128. I asked about the thicknesses of these compared to the Torras. “Usual thickness.” I am not sure about that. I do feel the bottom edge of the Torras when swiping up though. It feels slightly sharp. That was not the case with the other two screen protectors. 🤔
Do you still feel the bottom edge sharpness with a thin case?
 

See the link above. They are not cheap but oh so good. Really edge to edge with the black outline. I know some don’t like the black outline but I do. I think it helps the protector blend right in and look invisible. I’ve never had an issue with the edges lifting up.
There are so many choices on Flolab. Thanks. Which one is the clearest? close to 100% light transmission?
 
Looking at the Torras protector after the positive comments here. I’ve always gone with the Ailun brand - should I consider switching to Torras?
 
Yes. It has the black edges. One of the first things I did after marveling over the ease and perfect install, was to check that. The protector does not block any of the display.
Great. using this one then. Could not decide to open the Apple Belkin Ultra Glass 2 (which is NOT edge to edge) or the Spigen EZ Fit (which does not have curved edges). Thanks again.
 
my 14 Pro Belkin UltraGlass screen protector does not fit the 15 Pro. at the edges of the curved screen it has not adhered and has streakes of air bubbles/lines running around the border due to the curved edge.
 
  • Like
Reactions: kvlq and drew0020
Looking at the Torras protector after the positive comments here. I’ve always gone with the Ailun brand - should I consider switching to Torras?
IMO, it is. Yes it's more expensive, and you only get two protectors included (with the Diamond) but the application is easy and the quality of the glass is fantastic.
 
Hello everyone. I joined you from Turkey. I bought 15 Pro Max from Apple Turkey Online Store 2 day ago. It will most likely be delivered on September 29. Last week, I bought a Spigen EZ Fit screen protector and Caseology Athlex Active Black case for 15 PM.

Today I decided to look the Macrumors forums because I was wondering if it would be compatible with the Spigen EZ Fit 15 Pro Max. As I expected, the EZ Fit doesn't fit well. So I just returned the Spigen EZ Fit to the local retailer and then immediately ordered the Torras Diamond Shield from Amazon US. But I paid $49.36, including our country's customs taxes and shipping prices. Yes, it was expensive. Huh...

Thank you all for the feedbacks. :)
 
Last edited:
  • Like
Reactions: Bella Argo
I usually go Spigen. I’ve recently used Zagg and liked the feel of the glass. I went with an overpriced AT&T one this time out of convenience.
 
This is the UltraGlass on Amazon that has the same installation tool as the Torras.

The UltraGlass and Torras recently talked about on Amazon look very much alike.

UltraGlass:

Torras:

N.B. These two are not to be confused with one sold at Apple Stores call Belkin Ultra Glass 2

Apple Belkin UltraGlass 2:


I ordered the last two, but will send the Apple Belkin back
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.