iPhone 15 Pro/Pro Max Screen Protector

[kvlq]

Torras came in, was relatively easy to install. I had some bubbles and needed to use the scraper, otherwise no issues. Following the instructions insured no dirt under the protector.

I did also install the ESR on my wife’s 14 Pro yesterday and I liked their installation cradle better where you push slowly down the center, it gave a totally bubble free fit. Plus the cradle itself held onto the phone better than the Torras one.

Ultimately those are all minor issues, the Torras went on fine, looks and feels great, and I can barely tell I even have it on.

now if you have both ESR and Torras, which one do you prefer and why? thanks.
im still not decided on which one to get, but tend more to get the Torras one.

 

[assisterah]

anyone here ordered Benks' Ultra Shield HD Screen Protector or GlassArmor Sapphire Coating Screen Protector?

Would like to hear the review on the black bezel and quality

I ordered GlassArmor Sapphire and GlassWarrior Sapphire, both of them had black bezel obstructing issues. Contacted the support and haven't got any response yet.

 

[Supermallet]

now if you have both ESR and Torras, which one do you prefer and why? thanks.
im still not decided on which one to get, but tend more to get the Torras one.

They both seem good to me. The ESR costs less and as far as I can tell doesn’t have black borders, the Torras does. Both seem equally good once applied. Both claim to have 9H hardness. I won’t know about durability until we’ve both had them on longer. If they perform equally well I’d say just get the ESR because it costs less.

 

[kvlq]

im curious which one feels better(better oleophobic layer), which one is "more" edge to edge. Ah, and also the edges , are both curved or sharp...

 

[jcp007]

 

[Lakersfan74]

Just put on my Spigen EZ Fit. Pretty easy just had to lift the screen on one side what I though was lint but just a small air pocket. Squeegeed right out.

 

[devindjs411]

View attachment 2279921

Used Zagg once & never looked back, every upgrade gets the top tier protector. Love their replacement process if it cracks as well. Mine arrived yesterday. Just waiting on the phone.

 

[Bohunt327]

Has anyone reached out to ESR about the border issue? Started noticing it a bit more even with a second application that is spot on.

Reply from the ESR Customer Support team for the 15 Pro series screen protector black border issue.

 

[tzxsean]

I ordered GlassArmor Sapphire and GlassWarrior Sapphire, both of them had black bezel obstructing issues. Contacted the support and haven't got any response yet.

yikes ... I'm going for Hoda 2.5D clear tempered glass then

 

[J Ham]

Reply from the ESR Customer Support team for the 15 Pro series screen protector black border issue.

You had better luck than me. I got them down to 50% refund

 

[Cerneka]

I ordered GlassArmor Sapphire and GlassWarrior Sapphire, both of them had black bezel obstructing issues. Contacted the support and haven't got any response yet.

Thank you for sharing. Had one ordered and just cancelled.

 

[Cerneka]

yikes ... I'm going for Hoda 2.5D clear tempered glass then

Please let us know how the hoda works out for you

 

[markp-a]

I have always went with techarmor ballistic glass with minimal issues and no screen breaks.

 

[Elektrofone]

How does the Flolab compare to the Torras.

 

[kyle007]

Looks great! Though, i'm not sure about that action button. How does it feel pressing the action button? That hole seems pretty deep, wish they went with a button there as well.

 

[paulchiu]

Looks great! Though, i'm not sure about that action button. How does it feel pressing the action button? That hole seems pretty deep, wish they went with a button there as well.

NG. hard to pinch.

 

[svish]

Bought a Spigen EZ Fit screen protector for my Pro Max. Did not get the phone yet. Delivery for 9th October

 

[Supermallet]

How does the Flolab compare to the Torras.

According to MobileReviewsEh on YouTube, the Flolab is the best, most durable tempered glass screen protector. He didn’t say specifically if he tested the Torras but he is very thorough in testing as many brands as he can.

He used to post in depth videos showing all the brands and products in a category that he was testing, and footage of the tests themselves, and then outcomes for each. Lately he’s switched to much shorter videos with just a recommendation and brief explanation.

I wish he’d go back to his old style of video because it was useful to know what else he has tested and how they fared. While these new videos are straight to the point, they don’t have the same depth of information as the old ones.

All that being said, even if the Flolab is twice as durable as the Torras, which I suspect it isn’t, you get two screen protectors with Torras for less than the cost of one Flolab after shipping.

 

[Supermallet]

now if you have both ESR and Torras, which one do you prefer and why? thanks.
im still not decided on which one to get, but tend more to get the Torras one.

I’m going to change my tune on this one and say it’s worth it to get the Torras. This Reddit post shows that the ESR border blocks a part of the display: https://reddit.com/r/iphone/s/nSlPKc29HT

 

[JiggyJaggy]

Is it quite a matte finish? I can't tell from the vid.

 

[paulchiu]

Is it quite a matte finish? I can't tell from the vid.

You can see it better after YouTube processed the HLG video into HDR tomorrow.
Yes, the back and frame are matte this year on the Pro Max

 

[kvlq]

I think he wanted to ask if the screen protector is matte.. seeing the video I would say that it's not, and it's so nice that it almost looks like the display itself.

 

[Cerneka]

According to MobileReviewsEh on YouTube, the Flolab is the best, most durable tempered glass screen protector. He didn’t say specifically if he tested the Torras but he is very thorough in testing as many brands as he can.

He used to post in depth videos showing all the brands and products in a category that he was testing, and footage of the tests themselves, and then outcomes for each. Lately he’s switched to much shorter videos with just a recommendation and brief explanation.

I wish he’d go back to his old style of video because it was useful to know what else he has tested and how they fared. While these new videos are straight to the point, they don’t have the same depth of information as the old ones.

All that being said, even if the Flolab is twice as durable as the Torras, which I suspect it isn’t, you get two screen protectors with Torras for less than the cost of one Flolab after shipping.

Saw some people posting on Reddit about the flolabs fitting poorly on the 15. Official response from flolab is that there’s a level of variance in the curved bezel on every phone. Sounds kind of bs to me, but they claim they’re making a 3d model to address these “variances” that is set to be released on September 30th.

 

[FuriousD]

I sent my ESR ones back and got a Torros one.

 

[Nhwhazup]

Saw some people posting on Reddit about the flolabs fitting poorly on the 15. Official response from flolab is that there’s a level of variance in the curved bezel on every phone. Sounds kind of bs to me, but they claim they’re making a 3d model to address these to“variances” that is set to be released on September 30th.

Interesting. I installed (the Pro) on 2 different phones with no issues. I have another one coming (the max) for our daughters 15 Pro. I’ll report back.