I really like it so far! Feels grippy without getting sticky. I wish the MagSafe was a little stronger but I rarely use my MagSafe wallet so I can live with itI have that case on my wish list. I had this case a few years back and I loved it.
I really like it so far! Feels grippy without getting sticky. I wish the MagSafe was a little stronger but I rarely use my MagSafe wallet so I can live with itI have that case on my wish list. I had this case a few years back and I loved it.
I amAnybody happy with the Mous case?
Did you get a chance to check this out today?It’s supposedly out at Verizon and Best Buy. Might stop to take a look tomorrow.
Always concerned about the saggy tpu when it comes to Otter cases
Went to my local Verizon, it wasn’t there although the site said it was 😡Did you get a chance to check this out today?
I am thinking of pulling the trigger on one. Please help lol.Went to my local Verizon, it wasn’t there although the site said it was 😡
Might try a Best Buy tomorrow
Go get one and give us a reviewI am thinking of pulling the trigger on one. Please help lol.
I am extremely interested in this case because of MagSafe, are you able to stand the phone up on its side to watch videos like pop sockets? I am deciding between this case and the pop socket version, I have the MagSafe pop socket attachment but would like a more "permanent" solution.View attachment 2161535 View attachment 2161536 View attachment 2161538 View attachment 2161539 View attachment 2161540 View attachment 2161541
got it today. not much time with it yet. here are my initial thoughts.
the case itself is hard plastic, slippery with dry hands. if i pull on the sides or the top there is barely movement. if i pull on the bottom, you can stretch the case. not sure why anybody would do that, but i have read here complaints about that. i assume it’s just like a regular symmetry case. it seems very protective. it’s a clean look.
buttons: great
magsafe: strong and seems like everything will work. i say this because my apple magsafe battery doesn’t work with all magsafe cases. the case has to be thin. it works perfectly with this case.
scratches: i think the back will scratch. i can see under good led lights some minor scratches already.
fingerprints: in one of the photos i can see one. my hands are super dry so it’s hard to tell.
screen protection: nice lip
camera protection: nice lip similar to others. not great but does extend beyond the cameras.
the grip pulls out. it is held by two plastic/hard rubber pieces. they don’t seem to stretch. it is very comfortable to hold, i’m using my index and middle fingers inside. to push back in, a slight push and it pushes in flat. it feels magnetic how it snaps back in, although i don’t think it is.
if you like using a grip, i think you’ll love this case. i’m happy i bought it.
Thanks for sharing! You find it at Best Buy? I might have to check it out irlView attachment 2161535 View attachment 2161536 View attachment 2161538 View attachment 2161539 View attachment 2161540 View attachment 2161541
got it today. not much time with it yet. here are my initial thoughts.
the case itself is hard plastic, slippery with dry hands. if i pull on the sides or the top there is barely movement. if i pull on the bottom, you can stretch the case. not sure why anybody would do that, but i have read here complaints about that. i assume it’s just like a regular symmetry case. it seems very protective. it’s a clean look.
buttons: great
magsafe: strong and seems like everything will work. i say this because my apple magsafe battery doesn’t work with all magsafe cases. the case has to be thin. it works perfectly with this case.
scratches: i think the back will scratch. i can see under good led lights some minor scratches already.
fingerprints: in one of the photos i can see one. my hands are super dry so it’s hard to tell.
screen protection: nice lip
camera protection: nice lip similar to others. not great but does extend beyond the cameras.
the grip pulls out. it is held by two plastic/hard rubber pieces. they don’t seem to stretch. it is very comfortable to hold, i’m using my index and middle fingers inside. to push back in, a slight push and it pushes in flat. it feels magnetic how it snaps back in, although i don’t think it is.
if you like using a grip, i think you’ll love this case. i’m happy i bought it.
Thank You Darrin for coming in hott with the freshest case out. Not sure if I need one thoughView attachment 2161535 View attachment 2161536 View attachment 2161538 View attachment 2161539 View attachment 2161540 View attachment 2161541
got it today. not much time with it yet. here are my initial thoughts.
the case itself is hard plastic, slippery with dry hands. if i pull on the sides or the top there is barely movement. if i pull on the bottom, you can stretch the case. not sure why anybody would do that, but i have read here complaints about that. i assume it’s just like a regular symmetry case. it seems very protective. it’s a clean look.
buttons: great
magsafe: strong and seems like everything will work. i say this because my apple magsafe battery doesn’t work with all magsafe cases. the case has to be thin. it works perfectly with this case.
scratches: i think the back will scratch. i can see under good led lights some minor scratches already.
fingerprints: in one of the photos i can see one. my hands are super dry so it’s hard to tell.
screen protection: nice lip
camera protection: nice lip similar to others. not great but does extend beyond the cameras.
the grip pulls out. it is held by two plastic/hard rubber pieces. they don’t seem to stretch. it is very comfortable to hold, i’m using my index and middle fingers inside. to push back in, a slight push and it pushes in flat. it feels magnetic how it snaps back in, although i don’t think it is.
if you like using a grip, i think you’ll love this case. i’m happy i bought it.
Thank You Darrin for coming in hott with the freshest case out. Not sure if I need one though
Same bro. It’s enticing because it’s new and shiny, but I’ve never been a grip kind of guy, and I only have the 6.1 pro, if I had the pro max I would consider more.Thank You Darrin for coming in hott with the freshest case out. Not sure if I need one though
no, unfortunately it doesn’t seem to work as a stand. i too wish it would. i’m going to experiment more today but yesterday the phone kept falling over.I am extremely interested in this case because of MagSafe, are you able to stand the phone up on its side to watch videos like pop sockets? I am deciding between this case and the pop socket version, I have the MagSafe pop socket attachment but would like a more "permanent" solution.
yes, best buyThanks for sharing! You find it at Best Buy? I might have to check it out irl
I got mine today too! Awesome little case and a definite improvement on the previous magsafe popgrip.no, unfortunately it doesn’t seem to work as a stand. i too wish it would. i’m going to experiment more today but yesterday the phone kept falling over.
Dude did you see Tees video that just dropped on it too?? Lmao…. I was on Amazon pricing it up before the video was even thru! 😆Anyone going to pick up the peak design case ? That material it’s made of looks great and eliminates smudges and finger prints ..Geez I just picked up the Mous speckled case too , collection keeps growing …
I'm going to pass on that one.Anyone going to pick up the peak design case ? That material it’s made of looks great and eliminates smudges and finger prints ..Geez I just picked up the Mous speckled case too , collection keeps growing …
Just seen it , oh wow this case looks great…going to order tonight ..Dude did you see Tees video that just dropped on it too?? Lmao…. I was on Amazon pricing it up before the video was even thru! 😆
Picking Laina up from my local Verizon in a little bit. Figured I’d give it a shot, and if I don’t like it, I’ll return it.I got mine today too! Awesome little case and a definite improvement on the previous magsafe popgrip.
No, it won't work as a stand, but search for otterbox "post up for magsafe" for their solution, while pocketable, it still ends up being something you have to remove for charging etc...
Does it scratch easier than the regular Symmetry case for the 14PM?Picked up the otter grip pretty solid case. The fit is better than any OtterBox I’ve tried before, I will Echo someone’s earlier statement that you can definitely see that there might be some scratching on the back.
Edit: after the ride home, the MagSafe strength is very strong, although there are already marks (can be wiped off) on the back