Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.

vine-boating

macrumors 68020
Aug 10, 2017
2,236
575
That sucks. So what are you going to do?
I will just keep it.

I mean it is only in the corner of the case and isn't noticeable at all especially since my iPhone is White. You only can the defect when you remove the phone from the case and you have the case close up to to your eyes.
Obviously, this shouldn't be happening as the case is only a couple of days old but it seems the frost wearing off after removing the phone from the case seems to be a common issue. I think Tee mentioned it as well in one of his videos as well.
 
  • Like
Reactions: macher and gagee

vine-boating

macrumors 68020
Aug 10, 2017
2,236
575
That’s why they offered you a partial because it would be too expensive to ship you a replacement.
That's my thinking as well. That's the annoying thing about purchasing cases from other countries. It is a hassle when you need to return it and can be expensive just to get a replacement.
 
  • Like
Reactions: gagee and macher

macher

macrumors 68040
Oct 13, 2012
3,341
1,728
That's my thinking as well. That's the annoying thing about purchasing cases from other countries. It is a hassle when you need to return it and can be expensive just to get a replacement.
Just order from your own country and don’t get sucked into the glamour.
 

gagee

macrumors 6502a
Oct 21, 2019
637
503
That's my thinking as well. That's the annoying thing about purchasing cases from other countries. It is a hassle when you need to return it and can be expensive just to get a replacement.
Yup it always cost us more to return compared to somone to living in the US.
 

gagee

macrumors 6502a
Oct 21, 2019
637
503
Just order from your own country and don’t get sucked into the glamour.
But this forum makes you get sucked in with all the nice cases Lol. I could have ordered a Keyway leather case since they are Canadian but i got the Andar aspen since there was so much hype about it.
 
  • Like
Reactions: off2marz and macher

vine-boating

macrumors 68020
Aug 10, 2017
2,236
575
Bummer! Did you order direct from PR or through Amazon?

I have to hand it to Pitaka; with my peeling finish issues, their support was super responsive and helpful. Replacement case was shipped within a few days, virtually no questions asked.
Ordered from the Phone Rebel website. I don't think the PR case is sold on Amazon UK if not I would have ordered through Amazon.
 
  • Like
Reactions: macher and gagee

thatappleguytoday

macrumors 601
Feb 9, 2006
4,103
8,857
Jacksonville, FL
How does the Nomad Sport compare to an Apple silicone case as far as size/shape/weight/hand-feel? (Ignoring the obvious difference in materials, of course.) It looks like a similar fit from photos.

Very similar. Both are lightweight, but the sili is def a touch lighter. Fit is excellent on both. Grip is excellent on both. MagSafe and buttons are way better on the Nomad.

Both are easy recommended
 

thatappleguytoday

macrumors 601
Feb 9, 2006
4,103
8,857
Jacksonville, FL
I will just keep it.

I mean it is only in the corner of the case and isn't noticeable at all especially since my iPhone is White. You only can the defect when you remove the phone from the case and you have the case close up to to your eyes.
Obviously, this shouldn't be happening as the case is only a couple of days old but it seems the frost wearing off after removing the phone from the case seems to be a common issue. I think Tee mentioned it as well in one of his videos as well.

Remove the phone from the bottom first. It happens only when removing the phone any other way and then the phone scrapes the bottom when lifting out.

That’ll prevent further frosting scraping off
 

vine-boating

macrumors 68020
Aug 10, 2017
2,236
575
Just order from your own country and don’t get sucked into the glamour.
What do you mean? They don't see the case in the UK unless you mean I should have opted for a different case instead of buying the Phone Rebel. I only bought it because of the great reviews on here and a lot of the cases I tried I did not like, for example the Otterbox Core and the Apple Silicone.
 
  • Like
Reactions: macher

off2marz

macrumors 6502
Oct 31, 2023
410
743
Remove the phone from the bottom first. It happens only when removing the phone any other way and then the phone scrapes the bottom when lifting out.

That’ll prevent further frosting scraping off
Yeah, except then the alignment magnet might come out lol. Gotta pick one I guess; alignment magnet or frost
 
  • Like
Reactions: macher

KentuckyHouse

macrumors 68030
Jan 29, 2010
2,723
998
Lexington, KY.
i hope i dont have any of these issues everyone is having lol when mine arrives on Tuesday or Wednesday.

You’ll be fine, I’m sure. I had the alignment magnet come out on my first Synthesis and they sent me a new one, but a tiny drop of super glue and the original case still works like new. Just don’t overdo the glue. A tiny drop would fix it (if it happened).

I agree it shouldn’t happen, but it’s really an easy fix if it does on the Rebel Frosted as well as the Synthesis.
 

gagee

macrumors 6502a
Oct 21, 2019
637
503
You’ll be fine, I’m sure. I had the alignment magnet come out on my first Synthesis and they sent me a new one, but a tiny drop of super glue and the original case still works like new. Just don’t overdo the glue. A tiny drop would fix it (if it happened).

I agree it shouldn’t happen, but it’s really an easy fix if it does on the Rebel Frosted as well as the Synthesis.
Good to know. Thanks.
 
  • Like
Reactions: KentuckyHouse

macher

macrumors 68040
Oct 13, 2012
3,341
1,728
What do you mean? They don't see the case in the UK unless you mean I should have opted for a different case instead of buying the Phone Rebel. I only bought it because of the great reviews on here and a lot of the cases I tried I did not like, for example the Otterbox Core and the Apple Silicone.
That’s the risk you have to take.
 

gagee

macrumors 6502a
Oct 21, 2019
637
503
Question for anyone who has bought from Phone Rebel who is Canadian. Did you have to pay any custom or duties and how was it done? Was it through Canada post or through USPS Since it gets handed over to Canada post from USPS.
 
Last edited:
  • Haha
Reactions: Surfsalot

KentuckyHouse

macrumors 68030
Jan 29, 2010
2,723
998
Lexington, KY.
Anyone have the Andar Aspen in Moss (green) and would like to share a pic or two? I noticed it came back in stock and I’m tempted by how everyone’s liked the turquoise color, but I’ve had my eye on the Moss for a while.

510455589e864882634323233bed53ba.jpg
 
  • Like
Reactions: macher and Ta0jin

Hooterville

macrumors 603
Sep 24, 2012
6,015
10,123
Here is my recipe for Frosty removal:

I have found the safe way to remove the Frosty from your phone without causing any interior frost damage. Just push out the bottom two corners of the case first, then the upper top right corner (not camera corner) and then just peel the case up from the bottom.

I have already damaged the bottom edge of my interior frost on my 2nd Frosty by peeling the camera area and top corner first :( What happens is the edges of the phone dig into the interior frost and cause damage when trying to pry the case off the phone.

The bottom corner first removal seems the safest method to me.
 

kadinh

macrumors regular
Apr 23, 2015
154
185
Few people here have turned this thread into the OCD case thread, same questions over and over, wasn't like it last few years.
lol right? I was thinking the same thing. I have the case on my phone to protect my phone, not the other way around. As long as my $1500 device is protected, I’m ok if my $50 plastic square gets scratched.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.