Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Anyone know if the metal band cases affect signal on the iPhone X? Looking at the xdoria cases, the audio channel seems nice to have. But I don’t want to sacrifice signal quality.
 
Debating between Spigen Liquid Air, Spigen Thin Fit, or Totallee's Ultra Slim case... not sure. Have been using Spigen's Thin Fit on the iPhone6S for years now and love it. Any one have history with both Spigen and Totallee and their opinions?

Just realized that I won't be able to use my magnetic car mount if I want to use wireless charging. The purpose of the case was purely to hold the piece of metal to attach to the magnetic car mount... guess I need a new, clamping style car mount?
 
Debating between Spigen Liquid Air, Spigen Thin Fit, or Totallee's Ultra Slim case... not sure. Have been using Spigen's Thin Fit on the iPhone6S for years now and love it. Any one have history with both Spigen and Totallee and their opinions?

Just realized that I won't be able to use my magnetic car mount if I want to use wireless charging. The purpose of the case was purely to hold the piece of metal to attach to the magnetic car mount... guess I need a new, clamping style car mount?

Check this out... they have magnetic mount cases with wireless charging plates...

https://www.ipitaka.com/collections/magmount-qi

They have cases that go with the MagMount ... and though the website says that the MagMount Qi is "sold out", I found it on Amazon...

I found these guys through the Watch stands thread... and even tested their desktop dock... I have no interest in this company or their products, except as a customer...
 
  • Like
Reactions: sddabrow
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Official ones are usually timed to release right before the phone does if I recall and since that phone is on delay until October....

Just seems odd they'd announce the phone and have it up on the store with the pre-order date but not do the same with the cases. Don't remember them doing that before.
 
Has anyone had any luck finding a case similar to the Apple Leather case, for the iPhone X/XS that supports wireless charging & has a magnetic back? I used to have a Leather wallet case from Doc Artisan; however, they have moved to a hard case for their wallet line, and I prefer a soft leather or thinner case.
 
D8F2F62E-99FA-4F5B-B097-E29533B87503.jpeg 38B13C0D-50CB-470C-86E3-22F987D49FE0.jpeg
Spigen case arrived today. Here’s a couple of shots with my X in it.
 
Last edited:
Has anyone had any luck finding a case similar to the Apple Leather case, for the iPhone X/XS that supports wireless charging & has a magnetic back? I used to have a Leather wallet case from Doc Artisan; however, they have moved to a hard case for their wallet line, and I prefer a soft leather or thinner case.

I have been looking for something like this and I am now strongly considering this case and placing a magnet plate at the bottom portion of the phone between the phone and case.

I also like that this case uses nice horween leather and covers the bottom of the phone.

Anybody have any experience with Nomad phone cases or products in general?

855848007847_E_1800x1800.jpg

855848007694_A_1800x1800.jpg

855848007847_D_1800x1800.jpg
 
I have been looking for something like this and I am now strongly considering this case and placing a magnet plate at the bottom portion of the phone between the phone and case.

I also like that this case uses nice horween leather and covers the bottom of the phone.

Anybody have any experience with Nomad phone cases or products in general?

855848007847_E_1800x1800.jpg

855848007694_A_1800x1800.jpg

855848007847_D_1800x1800.jpg
Yes, used the Nomad Rugged for my X and it’s amazing! No complaints at all, it’s my favourite case.
 
I’ve been searching myself and it has come down to the following contenders (in no particular order):

Spigen Liquid Crystal
Ringke Air
Caudabē Lucid Clear

If anyone has had experience with any of the above please let me know the pros and cons.
I love the ringke Air. I had it in smoke grey and dropped my X a few times on concrete with no issue. I the spigen is good too. I ordered the ringke Air in clear for my max... I am a bit concerned about it getting yellow, but at 7.99 I can always pick up a new one
 
Yes, used the Nomad Rugged for my X and it’s amazing! No complaints at all, it’s my favourite case.

Are their XS cases thinner than the X case? I noticed the drop protection is only stated at 6 feet now compared to 10 feet I believe they used to state?
 
I have been looking for something like this and I am now strongly considering this case and placing a magnet plate at the bottom portion of the phone between the phone and case.

I also like that this case uses nice horween leather and covers the bottom of the phone.

Anybody have any experience with Nomad phone cases or products in general?

855848007847_E_1800x1800.jpg

855848007694_A_1800x1800.jpg

855848007847_D_1800x1800.jpg
I bought spigen magnetic plates on amazon for $6.99 and put one in my Apple leather case for my car mount. Works perfectly. It holds my 8 plus easily so no worries for the Xs or Max.
 
Are their XS cases thinner than the X case? I noticed the drop protection is only stated at 6 feet now compared to 10 feet I believe they used to state?
Yes indeed, drop protection went from 10ft to 6ft. However, the new XS case is 33% thinner than the 'old' X case.
 
Thanks! Which color did you go with for the Nomad? Do you have any pictures of your previous one?
For the X, they only offered brown. The black one is new. Here are a few pictures of my cases.

I had two (lighter one was was brand new when the pictures were taken, the other one a few months old).
 

Attachments

  • F586026A-CB4E-4CD6-8E5C-7CFD18ADA93B.jpeg
    F586026A-CB4E-4CD6-8E5C-7CFD18ADA93B.jpeg
    3.1 MB · Views: 252
  • 27652EB6-7113-49BE-B12B-4183E12E4B36.jpeg
    27652EB6-7113-49BE-B12B-4183E12E4B36.jpeg
    2.7 MB · Views: 272
  • DE62A76A-F10A-4025-B51B-69F045236587.jpeg
    DE62A76A-F10A-4025-B51B-69F045236587.jpeg
    3.2 MB · Views: 281
  • 73D2A302-71A3-49F2-B127-F419D93F5A16.jpeg
    73D2A302-71A3-49F2-B127-F419D93F5A16.jpeg
    2.5 MB · Views: 258
  • 48BB475F-B324-4047-98CA-166EC5BBAEB8.jpeg
    48BB475F-B324-4047-98CA-166EC5BBAEB8.jpeg
    2.7 MB · Views: 244
  • Like
Reactions: BrianSoCal
I wish there was a soft/flexible case like the Peel / Totallee cases. I can’t stand the idea of the microabbrasions that hard shells against the metal would cause.
 
Big fun. I though the camera position is slightly different between X and Xs. Also how does the lower part cut out look like, do you mind to share a pic?

thanks
Here you go
 

Attachments

  • B959D6CD-D8D7-462F-BF1B-F1060762091E.jpeg
    B959D6CD-D8D7-462F-BF1B-F1060762091E.jpeg
    418.8 KB · Views: 209
  • Like
Reactions: BradCN
Anyone ordered the Mous limitless v2.0? Anybody that has experience with them care to chime in? I'm looking at the leather or CF
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.