Is there an issue with the photos app on some machines? Since upgrading to Catalina I no longer have the photos tab in the app (the bit circled is missing on my older unsupported machine)
View attachment 894963
Wow. Unsupported retina Mac?
Is there an issue with the photos app on some machines? Since upgrading to Catalina I no longer have the photos tab in the app (the bit circled is missing on my older unsupported machine)
View attachment 894963
I actually thought it would run slower because it's not designed to support the Mac it's on, therefore not optimized for it, but it's super snappy!
much older than thatWow. Unsupported retina Mac?
Without more info there is no way to help you...Joining the club of not being able to enable extensions. Please, don’t tell me it’s incompatible. I installed them on a 12,1 iMac, and they all work fine. They worked fine on my Late 2011 MacBook Pro until I tried disabling and re-enabling
He said "don´t tell me"….Without more info there is no way to help you...
He said "don´t tell me"….
Without more info there is no way to help you...
No the photos app requires metal for the photos tab to appear in Catalina but works well in Mojave the only work around in create a smart photo album and rename it Photos and move your pictures there
Please help me installing 10.15.3 from 10.15 my MacBook Pro is also late 2011I said don’t tell me the extensions aren’t compatible, because they are.
Late 2011 13 inch MacBook Pro, 12GB of RAM, 10.15.3, updated from 10.14.6 Mojave, extensions are AdGuard for Safari, LastPass, and NightEye. Extensions were enabled and functional on this install, I disabled them, and was unable to re-enable them. You hit the checkbox and a whole lot of nothing happens.
Same extensions were installed on a 12,1 21.5 inch iMac, 10.15.3, updated over High Sierra. I can enable and disable them freely on that computer. It does not have the legacy GPU patch enabled, as there is a metal capable Quadro installed.
Good evening guys. I wrote about my problem before. Actually my MacBook Pro late 2011 is on 10.15 now and I tried to install 10.15.4 beta 1 but it freezes on the last 20% loading bar with Apple logo and keeps restarting , I did all the steps has provided with swpatch ans catalinafix and terminal , and after long week I read comment #1 and I knew that loop happen with 10.15.4 beta 1 so I started to install 10.15.3 and after long process, same things happened , there installing load bar never finish and freezes in the end. #PleaseHelp
[automerge]1582131228[/automerge]
Please help me installing 10.15.3 from 10.15 my MacBook Pro is also late 2011
Any thoughts on why after running the OTA update on a Mid-2007 (with the CPU swap) it boots back into 10.15.1 instead of finishing the 10.15.3 install?
After the power on try holding alt-option key, and a volume labelled "macOS Installer" should show at the apple startup manager, select that Volume to boot, and OTA Installer should continue, but consider that if you are installing on an external USB hard disk, with a non-native APFS machine this won't work, but only if the Catalina is internally installed (SATA or NVMe internal disk).
Thanks for the reply. I'm installing on the internal SATA, but this machine isn't native APFS, so I'm using Dosdude's APFS overlay to make it boot. Booting with the option key down, it will only allow me to select the internal drive, and that boots back to 10.15.1. Haven't figure out a way to select the install to boot to with DosDude's overlay.
The patches work but I ran into a problem on my iMac had to reinstall 10.15.3 now it can't find the update and I got 10.15.4. Dev Beta 2 install on my mamboed 5,2 but I used the HITool.box for the shadows from Dec with that was a nog won't boot10.15.4 beta 2 (19E234g) updated through OTA @Pinarek method, using my updated catalinaswufix4amfi script, then applied the post-patches, in addition with the @ASentientBot 4b1 output wrappers
worked without issues, just Display.prefpane doesn't show properly, but not a big deal.
Everything else worked.
To OTA update, run the swupatch.sh , then open the Catalina Software Update prefpane and start to download the 4b2 update , during the downloading run the catalinaswufix4amfi.command, then let the OTA update install to complete through its automatic phases.
For those who want to try, I attach the updated swupatch and catalinaswufix4amfi that will work without issues but consider these two cases (after the bootloop) :
1) If you want a post-OTA easily bootable GUI Catalina just apply the post-patches for your machine but don't select the Legacy Video Patch.
2) If you decide to apply the Legacy Video Patch don't forget to have pre-downloaded and after use these output wrappers: 4b1 output wrappers
Yes, a stony road it is sometimes without out-of-the-box patcher ;-)The patches work but I ran into a problem on my iMac had to reinstall 10.15.3 now it can't find the update and I got 10.15.4. Dev Beta 2 install on my mamboed 5,2 but I used the HITool.box for the shadows from Dec with that was a nog won't boot
No, the Mojave patches also contain the fix you´d need to get correct Menu and Sidebar rendering.I am considering to downgrade to Mojave because of the incompatibility of Fotos and Maps.
I guess the Mojave Patcher is not maintained anymore and does not contain the "Updated the Legacy Video Card Patch, finally fixing the long-present grey Menu Bar and Finder Sidebar issues".
is this correct?
Way cool, even runs on MBP4,1, Catalina 10.15.4b1.
I heard that watchOS >6 is required now, also to log in?
[automerge]1582192856[/automerge]
No, the Mojave patches also contain the fix you´d need to get correct Menu and Sidebar rendering.
Just run the latest patchupdater.
The Photo and Maps app run quite well here on Catalina. What are your issues there?
You can also re-install iPhoto if you like using the retroactive tool!